How do you do nail stamping?-tech you how to become master of nail stamping
How do you do nail
stamping?-tech you how to become master of nail stamping
Nail
stamping is now
a very hot nail art. Nail stamping
is a simple DIY art form that allows you to make any design from an etched
metal plate and then use a stamp to transfer the artwork directly to your nails
on. This technology is a simple, convenient and economical method of manicure.
You can even make your own nail design and create your own unique and beautiful
nails.
Next, we will
introduce the steps and methods of using Nail
stamping.
First you need to
choose a bright and spacious work place, then you need to get the material and
tools for nail imprinting. The three basic tools are: stamping plate, scraper
and die with silicone or rubber head, base coat will Protect your nails from
the harsh effects that polish can have. it will create a barrier between the
nail and the polish and prevent staining and the nail from becoming looking longer
and brittle from the chemicals found in nail polish.
Base Coat
recommends BeautyBigBang Peel Off Liquid Nail Tape Latex Cuticle Protector For
Manicure And you
need Silicone Head Stamping Clear Jelly Handle Nail Art
Stamper & Scraper
The style of the Nail Stamping Kit seal can be selected here!
Second, Apply
primary colors. When the base coat is dry, apply the desired color to the
nails. If the first layer is colorless, apply the second layer. Allow a few
hours for the nail polish to dry.
Third, Allow the
nail polish to dry completely.
Next, you can
design your own nail style.
One, you need coat
the design with polish. Select the desired pattern from one of the plates.
Apply the design with polish. For this reason, it is preferable to use an
abrasive having a strong coloring power.
Two, Scrape off
excess polish. The rim is at an angle of 45 degrees to the stencil. Scratch off
excessively and quickly excess polish until the design is clearly visible. Wipe
the scraper on the paper towel to remove the nail polish. If you have not
removed any excess polish for the first time, scratch the plate again.
Three, Use a
stamper to remove the varnish. Lift the pestle and roll from one side of the
pestle to the other side and roll over the design on the plate. The design
should be clearly visible on the surface of the pestle. Most paint should have
been taken from the stamp.
Four, Roll the
pestle on the nail. While the pestle surface is covered with polish of the
chosen design, move from one side to the other and roll the pestle on the nail.
Press down hard, but don't push in as hard as the design gets dirty. Lift the
stamp off the nail and make sure the design is stamped on the nail. If not, try
again or remove all polish with a nail polish remover and cotton ball and start
over.
Five, Nail is
coated with a transparent top coat. After pressing the design against your
nails, wait 1-2 minutes for the varnish to settle and set a little. To protect
the design and make the nail lacquer last longer, apply a transparent top coat
to the lacquer. The top coat ensures that the nails are protected to some
degree from daily wear.
For more Nail
stamping style, you can browse it!
https://www.beautybigbang.com/pages/shop-by-look
Comments